|
|
|
Examples: ControTrace Elements On Vessels
|
|
|
 |
|
These ControTrace Vessel Jackets operate under 569 psig
(39 barg) steam at 480 F (249 C). The 10-foot diameter vessels, in Japan, are over 20 feet
high. ControTrace Panels were selected for the application (a high-melting olefin) because
they could uniformly heat the complete periphery of the vessels. The piping associated
with the project was also heated with ControTrace elements. |
|
|
|
12-foot diameter storage tank for hot
melts uses ControTrace Panels heated with steam at 200 psig (13.8 barg) and 388 F (198 C).
The panels on the bottom of the vessel operate continuously. The three rows of side panels
are zone controlled by a level controller responding to the quantity of hot melt adhesive
in the vessel at a particular time.
|
|
 |
|
|
|
 |
|
ControTrace Elements were selected for use on large
storage tanks for phthalic anhydride. The heating medium was steam at 150 psig (10.3
barg), 365 F (185 C). Uniform heat application was a major reason ControTrace was selected
for this application. |
|
|
|
|
|
|
|
