Have a Question? Ask Our Experts!

CSI’s bolt-on ControTrace®/ControHeat® heating technology is successfully used across a broad spectrum of processes. A partial listing of these processes and their typical temperature ranges are shown below:
- Acrylic acid (55-80°F)
- Amine acid gas (100-130°F)
- Ammonium nitrate (365-400°F)
- Benzoic acid (285-310°F)
- Bisphenol-A (310-365°F)
- Calcium chloride (420-700°F)
- Caprolactam (190-250°F)
- Chicle (240-280°F)
- Chlorinated resins and waxes (215-365°F)
- Claus tail gas (270-340°F)
- Coal tars (350-600°F)
- Coker bottoms (350-550°F)
- Chocolate (180-200°F)
- Cyanuric chloride (335-365°F)
- Dimethyl terephthalate (380-400°F)
- Dinitrobenzene (220-365°F)
- Edible oils (240-300°F)
- Hot melt adhesives (425-475°F)
- Liquified coal (500-750°F)
- Nylon (450-600°F)
- Phosphorus (240-290°F)
- Phosphorus pentasulfide (550-750°F)
- Phthalic anhydride (290-350°F)
- Polyolefin additives (455-750°F)
- Polycarbonate (650-750°F)
- Polypropylene (atactic) (355-375°F)
- Polystryrene (350-400°F)
- Polyesters (600-750°F)
- Rosin (340-365°F)
- Sour water stripper gas (180-195°F)
- Sucrose (275-300°F)
- Sulfur (270-300°F)
- Sulfur sweep air (260-280°F)
- Silicones (240-340 °F)
- Sodium (240-280°F)
- Toluene diisocyanate (300-360°F)
- Toluene diamine (300-340°F)
- Toluene sulfonamide (325-340°F)
- Toluic acid (365-390°F)
- Tall oil pitch (275-355°F)
- Terephtalic acid (400-450°F)
- Tetrachlorobenzene (300-350°F)